I have an 9600 which I am still trying to get to work. Have been busy doing the day job that I have neglected this little project.
I have turned it in this afternoon and the LM cartridge is showing as missing, it is there I can see it. I have tried the usual, Googled it,turn it off and turn it on, reset, unplugged from mains, replaced cart with old empty one ( they are both original carts) still the red light is showing nothing there.
Have also followed these instructions still nothing, well a red light saying there is no cart.
Any ideas would be appreciated.
7600/9600:
1. Turn the printer’s power off
2. Hold down the paper source, down arrow and cut/eject buttons while turning the power on
3. VIEW COUNTERS will be displayed. Press the down arrow till SERVICE CONFIG displayed, press the Enter button.
4. Press down arrow until you see ED MODE, press the Enter button
5. Press the down arrow till 0 is displayed, then press Enter to accept. Turn the power off.
6. Turn back on.