Ahh, I see. Thanks for the info!
At the moment we're still trying to get the time + temperatures (+mug-hold pressure) correct. Things are looking up slightly, here's some photos from today:
http://i.imgur.com/wLEVB.jpg - Colours faded, horizontal lines, edges only 60% done.
http://i.imgur.com/IAQuN.jpg - Closer look at the edges + horizontal lines.
http://i.imgur.com/wLEVB.jpg - Closer look at fader colours.
http://i.imgur.com/rPSp6.jpg - Blacks look off, SEGA logo is blurred/distorted.
(Not the best pics ever but they show what's wrong + where.)
Common problems:
1: Black colours are appearing brown/burnt.
2: Vertical lines (I think increasing the heat removes these but results in #1)
(I think video-game prints are great for testing as it's easy to see where the colours are off.)
I have the numbers (times + temps) written down by the printer but not to hand. I'll edit them into this reply when I can.
Any suggestions guys? Recommended times and temps from a fellow Ricoh GXe3300n user would be great. Fine-tuning the handle/mug-grip is obviously not so easy.
Thanks again.
Progress is (slowly) being made, we'll get there in the end!