Hi, I picked up an ET-15000 at an absolute steal, still boxed. However, when opened it was clear that it had been opened before and whoever opened it...
The samples sent by Xpres are not apparently the new Unisub coasters - oddly. Anyway, will ditch trying to print on them and will wait until the new...
We have had a sample of the round coaster delivered, thanks to Xpres, and will try and print one later but our concern was the weight of the coaster....
Is the problem only effecting the first side you print? If you are not threading the shirt then the first side you print is effectively being pressed...
I've just bought the Blue-Wave 5 in one mug press. And I have been able to set the temperature and timer. But for the life of me I can't work out how...
MDF is a poor material for any type of printing jig. It will absorb moisture so it is virtually impossible to keep the jig flat. I have manufactured...
I couldn't print onto their lighter backed matt finish coasters. The heat tape was ripping the MDF (I think) backing. How do the new samples compare...
I got this call yesterday from Xpres also... definitely concerned by the change. Looking at the image they sent over, it looks very similar material...
