PDA

View Full Version : Silhouette Cameo Blade Settings



Bob700
21-02-2015, 06:59 PM
Hi
I intend to use MDP hotflex T shirt vinyl can any advise on the best blade setting, I will not be using a carrier sheet

Thanks Bob

scotty44
21-02-2015, 07:18 PM
Set to vinyl, blade 1 , speed 8 and thickness 9 that works for me without the carrier sheet :cool:

viccar
22-02-2015, 12:45 PM
Hi use the tool in studio to give me, and adjust blade to what it says, its always a good starting point, if you are not sure use the test cut.
One thing i find is with heat vinyl it doesnt look like its been cut, until you start to weed it.
I use 8 speed 4 thickness and 2 blade but my blade is nearly 3 years old. so maybe a 1 with a new blade.
http://www.dyesubforum.co.uk/vbforum/attachment.php?attachmentid=3326&stc=1

Bob700
22-02-2015, 02:42 PM
Thanks for the info/advice