PDA

View Full Version : Liyu TC631E cutting problem.



Kevdog
17-07-2016, 03:04 PM
Just having a read through the vinyl cutter section to see if I could get some answers to my long time problem.

I have been having this issue for a while an I'm unable to find a cure myself.

Thing is, it seems as if where the cutter starts to cut a font/shape and where is finishes it's not cutting all the way. I have tried the overcut which does overcut but if you look closely you can see a very small section as if its started to cut to early and by the time its finished the cut on the font/shape they don't meet up.

I hope this makes sense as it's the best I can explain. I am using flexi as my cutting program.
I have kind of given up on the machine because of this and now stick to my cameo but i'ts a new machine and a bit of a waste just sitting there as it would save so much time if I could get it working properly.

The machine does this with both sign vinyl and clothing vinyl (worse on clothing vinyl but I gather that's because it's softer)

Hope somebody can help.

Paul
17-07-2016, 03:58 PM
try demo http://www.signcutpro.com/download-signcut-productivity-pro/

if it doesn't help than i would say its a driver at fault.

Kevdog
17-07-2016, 07:00 PM
Thanks Paul i'll give that a go.

Kevdog
20-07-2016, 10:58 PM
Finally gave this a go but still the same[emoji30]


Sent from my iPhone using Tapatalk

mrs maggot
21-07-2016, 10:17 AM
when you run the test cut - should be a button on the machine? how does that look ? have you got the blade settings right? have a look at this https://www.youtube.com/watch?v=vq6PlApf7JI

Paul
21-07-2016, 11:19 AM
Have you got off set setup corectly? I belive it should be something like 0,250 value

Kevdog
21-07-2016, 06:01 PM
when you run the test cut - should be a button on the machine? how does that look ? have you got the blade settings right? have a look at this https://www.youtube.com/watch?v=vq6PlApf7JI

It looks similar although one thing I will say is I have to put my cut pressure way higher than 12g to cut just sign vinyl. Mines will only cut when at 96g.


Sent from my iPhone using Tapatalk

Kevdog
21-07-2016, 06:02 PM
Have you got off set setup corectly? I belive it should be something like 0,250 value

I have Paul. I've messed about with this also but still having the same effect.


Sent from my iPhone using Tapatalk

Kevdog
21-07-2016, 06:03 PM
It looks similar although one thing I will say is I have to put my cut pressure way higher than 12g to cut just sign vinyl. Mines will only cut when at 96g.


Sent from my iPhone using Tapatalk
Can I ask what make of machine you are using here?


Sent from my iPhone using Tapatalk