PDA

View Full Version : Epson D120 low ink warning



georgess
23-11-2011, 04:49 PM
Hi chaps, I have switch on the Epson D120 to do a few mats, however, I admit that it's been approx 3-4 months since I have sublid, the ink light is on telling me that I have no black ink. I can't do a nozzle check or clean. Any ideas?
Regards,

George

georgess
23-11-2011, 06:05 PM
ok, got it working, printed ok for 2-3 sheets, now everything is yellow (????????) heeelllllp

Paul
23-11-2011, 06:22 PM
Do a nozzle check ;-)

georgess
23-11-2011, 07:57 PM
Hi Paul, did that, 3 times, no good, could it be my profile? I double checked my settings of the ICC profile. Strange, 1st 2 prints perfect, then it went t*** up.

Paul
23-11-2011, 08:39 PM
So whwn you did nozzle check how is it look like??? Any lines missing?

bms
23-11-2011, 10:11 PM
Hi Paul, did that, 3 times, no good, could it be my profile? I double checked my settings of the ICC profile. Strange, 1st 2 prints perfect, then it went t*** up.

If the nozzle check pattern is not perfect then there is no point going to print. Have a look at our FAQ on this matter (3rd up from the bottom)...
http://www.printerowners.co.uk/faq/12/1/sublimation-advanced.htm

kris_hm
24-11-2011, 08:57 PM
I've got D120 (with CIS) and from time to time one of the colours stop working (even if using printer regularly). If it happens, I pull out cartridges, give them a good shake (cover "ink flow holes" to stop ink splashing all over) and it helps :) I know it sounds bit silly but works for me