PDA

View Full Version : about to fire up the new mug press, but quickly...?



gavtheoldskater
23-03-2012, 10:55 AM
quick question; i'm going to fire up the new press this afternoon, coralgraph combo mug press, and the instructions state first mug in machine, turn on, 200/300secs at 160deg - or - 300secs at 180deg , then subsequent mugs at 180/180.

nice consistent instructions asides, but would it not be better just to heat the machine up with a spare mug in then just run with 180/180 (or time adjusted if req)?

accdave
23-03-2012, 11:10 AM
quick question; i'm going to fire up the new press this afternoon, coralgraph combo mug press, and the instructions state first mug in machine, turn on, 200/300secs at 160deg - or - 300secs at 180deg , then subsequent mugs at 180/180.

nice consistent instructions asides, but would it not be better just to heat the machine up with a spare mug in then just run with 180/180 (or time adjusted if req)?

I always warm mine up with a spare mug, at least then I know the actual mug run is going to be consistent

John G
23-03-2012, 11:15 AM
As above, warm up first with blank sacrificial mug in and a good start would be 180/180. If using a Ricoh both heat/time can come down a bit.

Cheers John

gavtheoldskater
23-03-2012, 02:19 PM
thanks, thats what i thought (and had read in various threads) but just wanted to double check.

for ref i'm using an epson b1100 with ***** sublimation inks, and when i get 2 mins to paypal some cash over to paul yes i will have an icc! ; )