PDA

View Full Version : Adkins A2 For 400 by 600mm



JMugs
20-09-2013, 11:31 AM
Is anybody printing 400mm by 600mm on an Adkins press?
This looks really tight on the measurements with no wiggle room.
The Pressmech gives me wriggle room but is more expensive again.

Anybody doing it let me know if it is fine or whether with experience you would now buy a smidge larger.

Janners.

pisquee
20-09-2013, 01:28 PM
The more wiggle room you have the better, as the further out on the platten you go there will be some drop off in temp and possibly pressure too.

JMugs
20-09-2013, 01:33 PM
My line of thinking there Pisquee.

Just I am tight, but pedantic...... not a good combination sometimes!

Janners