Printable View
Hi there - we just got an optical eye today and now need to install the thing on to the liyu sc631 - are there any videos or manuals to show exactly where the thing is supposed to go and where the wires need to be soldered, how to get to the part in question - any help would be appreciated - should have just bought the one with the optical eye in the first place but there's nothing like a challenge hey!
many thanks in advance
When you say an optical eye.....is it just a red led by any chance?
no it is a laser with one red and one black wire attached and a seperate chip which i think needs to replace one that is already on the board in the cutter
no it is a laser with one red and one black wire and a 20 pin chip which needs to replace one that is already onboard inside the cutter
Uhm, mine had the red led with 2 wires....and a little circuit board, but its an led, you must have a proper one then! Not the same model so it is possible. Did it have one before and you're just replacing it?
oh dear... :rolleyes:
I think you ma be quite disappointed :(
this is only red laser point help you with reg marks. as a guide. not good any way as beam is to large.
no not replacing it - my other half was being a bit cheap:) only kidding just decided i wanted one so he ordered it in now he has to fit it - he is pretty good technically (he is a MCP - so he knows his stuff - but this is kinda new and he doesn't want it going wrong so was just wondering if there were any tuts or manuals showing how to fit it in - thanks for coming back to me - much appreciated :)
thanks paul - if that's the case then i will just return it -
Watch Pauls video on contour cutting without an optical eye. And yes, it does sound like you've been sold the red led we all have on our Chinese cutters :-(
Justin, When you say LED do you mean simple red light coming out of the LED? Coz in my cutter is proper laser beam. is useless but still... its a laser :P
Always assumed it was led but should be same as yours........ Mine packed in soon after purchase so can't say.
any way. no point of loosing any sleep coz of that lol :)
they are quite clear on what the "eye" will and wont do, but i think some re-sellers just add their own definitions
The Optical eye is a laser pointing device for Contour Cutting. It is supported by software such as SignCut Pro and Flexi-Starter.
Its a shame as it seems to catch a lot of people out, but to sell it as an add on is really taking the mickey
... and always add to the price big time!!! i have seen £20-£50 difference of same cutter with and without this pointer. marketing genius. £50 for something that does nothing :)
thanks for your help - i will watch you videos anyway - much appreciated -
never posted to a forum before but was nice and quick and easy and you guys came back with some interesting points - so thanks very much - take care
No worries, that's what we're here for (amongst other things!) The community always answer posts very quickly which is what helps to make us special :-)
sorry - how do i get to watch paul's videos - is there a special secret link?
Poundworld and some other £ shops have laser guided scissors. When stripped these contain a small red laser pointer and a beam splitter. Remove the beam splitter (a small lens) and you are left with a 1cm long laser module with a red and black wire - this runs off 3 little coin cells in the scissors. The output is sharp and bright.
I imagine this would be usable - locate a 5v supply from the PSU, stick a small resistor in line with the red wire and glue the laser module on. Put a switch somewhere to turn it on and off.
:cool:
One brand of "laserpoint " type cutter I tested had something similar glued into the head shell, though I think it was a bright red LED in a barrel.
Alan