Thanks for the reply.
No. I always pre-press for 10 seconds and I also dry the freshly printed sublimation paper for about 40 seconds under an open press. I've been pressing this particular image...
Type: Posts; User: Anne_83
Thanks for the reply.
No. I always pre-press for 10 seconds and I also dry the freshly printed sublimation paper for about 40 seconds under an open press. I've been pressing this particular image...
Out of the blue my SG400 printer has started putting strange marks that cover the entire surface of my prints when using a light shade of grey. The image below is a close-up of a portion of a PU...
Thanks very much for the replies. :)
In my printer dialog box I have a couple of options to set the print quality. Currently it's set to the following:
Printer: SG-400
Paper Type: Inkjet
Print Priority: Normal (other options are...
I've done some more searching on this subject and the suspect now appears to be dirty/clogged pinwheels. Thing is, I've opened up the SG-400 printer but I can't seem to be able to see any pinwheels...
I hope someone can help me as I've tried most fixes but I'm still having problems.
I'm getting small patches of vertical dots on my printouts using my Sawgrass SG400 printer using A-Sub...
Does anyone know if it's possible to purchase a Genie III mug press heat band (Standard Durham 11/12oz) from anywhere in the UK other than Listawood? The price they are charging is a complete rip-off...
I've often wondered if when sublimating an item - let's say a mug for this example - what is the more important thing to prioritise (once you get past a minimum sublimation temperature of course);...
Printer is a 4-ink Sawgrass SG400. My printer resolution is set to 600 dpi. My original images are all done at 300 dpi. I'm also printing via Photoshop.
Thank you for your reply. I'm also using a very light pressure and copy paper (two sheets top and bottom). Since my previous post I've taken a closer look at my actual print outs (from Sawgrass...
I'm sublimating small 8x6 inch aluminium sheets on my Stahls Maxx 38x38cm heat press. Everything looks great, except I've noticed that the yellow colours appear to have a stippled/waves type texture...
Has anyone has experience of using both of these papers with t-shirts? Which would you say gives the most professional/durable finish? I suspect Subli-Flex would be the more permeant solution, being...
I'd like to be able to create my multicolour t-shirt designs at home without having to rely on a 3rd party producer to create the artwork (custom heat transfers etc.) or multiple colours and cuts of...
Many thanks for the info, Ricky. Wish I had that kind of money!
Yes, I'm pretty sure it's not a two-layers of acrylic job as well. I think it's almost certainly some kind of front and rear cold lamination technique. The back-printing would be easy enough, with a...
Does anyone know how acrylic blocks are produced that have two layers? Currently I'm using standard sublimation acrylic blocks to produce my images of local history images. That only allows an image...
Thanks for the reply. I'm using these ones from SubliBlanks: https://subliblanks.com/products/pu-leather-mouse-pad
Hi all. New to the forum and this is my first post so I hope I do it right!
I've been pressing the standard foam mouse mats for quite some time without any problems, but I recently decided that I...