Search:

Barcodes are bought in batches of 1000 from GS1. Not sure how you only have a handful?

Mug presses used to work this way, and for years we did mugs 180 degrees at 180 secs from we closed the press, and is still my preferred way, and wish this was an option on new presses

We still have out 44" but keep it for a spare when the 63" isn't needs servicing/repair

Look for a HeatJet 43 or 44
RA Smart are UK dealers for them
(https://www.rasmartmachinery.co.uk/product/heatjet-44-evo1/)

They are branded by a German company
(https://www.multiplot.de/)
...

We used to do 2.4, and changed to 2.2 a few years back. Some stockists complained, but ultimately kept ordering.

Normal markup for shops is 2.2x (assuming you and them are VAT registered)
Therefore a mug with an RRP of £10 (inc VAT) would therefore be sold to the shop at £4.55 (ex VAT)

Sometimes the panels have Chromaluxe on the back and sometimes they don't

Inktec do have an A3 paper - not sure if it's A3 plus, but it's a good match for their inks.

We use WooCommerce - we like that Wordpress can be made to do just about anything, that we're in control of every aspect of the site, chose the server/hosting, etc etc
There are plugins which cost,...

Go with a company selling a known brand of ink, rather than their own branded version, so you know what you are actually buying, both now and in the future, and so you aren't tied to one sole...

The HP Stitch wide format printers work well, so will be interesting to see if the R&D/Tech put into them ever filters down into smaller printers.
E2A, although predominantly they are their Latex...

For any of you that supply wholesale to shops, and want to broaden your client base, have a look at Faire
It's an online replacement of tradeshows


Your customers not already on Faire, will get...

Are you rolling the paper through the press the way it wants to roll?
It goes through your printer rolling in the way it is used to - is it rolling/curling the same way/direction when you run it...

Get an RM account and bypass the Post Office

Anyone using ErgoSoft RIP with an HP Latex printer (or even just Ergosoft)?

I am trying to get it printing borderless, and the option is greyed out for the print environment - how do we get it on?

Have you tried running the driver installer, set as run as administrator?

That's a very sweeping broad statement.
I always had very good results with InkTec in modified wide format Epsons, and are happy now that we've moved to the HP Stitch S300 with HP's sublimation...

Printer and ink likely only good to throw away (assuming the printer is used and has ink in it) If it's still new and unused, it should be OK, but will need new ink.
The presses should be fine - not...

Or set up a nice photo of the blank white unprinted product, and then use photoshop to mock up the image onto it.
This way the photo can be styled however you want it, can add more value if shot...

Weigh ink bottles when full
Weight ink bottles empty
You now know how much the ink weighs ... g/ml
Keep a count of how many A4 sheet you print
When your first ink runs out/needs refilling, re-...

PressMechs are also easy to take apart and replace parts when they fail - Dickie from PressMech has talked me through replacing bits over the phone as I've done it (the first time round) ... more...

We have proper card terminals for our shops ... one is ethernet, the other GPRS/2G, so can take it to events.
Both of these are through Elavon/SagePay who also do the main payment gateway on our...

I'd say your temp was too high, and would try dropping it to 180C for 60 secs as a starting point (get an infrared thermometer to check your press heat is what it says it is.
As said before, don't...

It looks like your print is missing black ... could be clogged, or your profile is just wrong.
I'd advise swapping to good known inks (sublinova) with a profile custom made for your printer, paper,...

Cut and sew. You can then have the printed panel white poly, and the rest of the shirt and colour cotton you'd like.