I know this is an old post, But just to help anyone else out there, I fit vinyl to trucks and trailers and do get bubbles, inevitable I find unless you are applying to a pristine surface, often I...
Type: Posts; User: decca591
I know this is an old post, But just to help anyone else out there, I fit vinyl to trucks and trailers and do get bubbles, inevitable I find unless you are applying to a pristine surface, often I...
Are the prints not actually printing correctly ? if the printer has stood unused then I would expect the print heads to become clogged by dried ink - don't just keep running a clean head cycle(could...
Thanks for the reply, something to have a play with on a slow day, I tend to keep decent size off cuts to use for one offs, small decals and also for quick screen prints !!
Its useful to know that...
Am I missing a trick here, are you saying that you print onto oracal 651 ??
Decca.
Hi Mugshots !!!
I did sort it out, the problem I was having was with windows not allowing me to install the drivers for the Goldcut, windows no longer allows unsigned drivers - as a safety...
Hi Guys
I know its an oldish post but I am looking for a set of drivers for my trusty Goldcut 721. Built a garage to use as a workshop and has been running fine for last couple of years, problem...
Many thanks
I will give it a go - thanks !
Decca
Okay
Thanks for your time and your input on this, I can use DC direct to power up the SSR but I will lose the temp control as I am effectively taking it out of the loop - I had wondered about...
Hi again !
Tied both controllers and the results are the same for both :
that is - there is no output on the connections between controller 9&10
there is also none on corresponding...
This press came non working, been in workshop about 18 mths waiting for me to look at it !
Had very little use, if any - all looks brand new even now, always considered it was worth keeping if...
Sorry, thought I'd replied to this one, mustn't have posted for some reason !!!
Both SSR's are exactly the same, same input (3 - 32)
2 wires going to 9 & 10 on the controller -
when I get in...
Yes, Both controllers are exactly same model, input output voltage etc !!!
just as an aside, if I put a low voltage thru the SSR then it operates and the press will indeed heat up, albeit with no...
I have just added a file to the downloads section, under Essentials, it is a manual for the 2001 controller, not sure it will shed much light on my current problem but I always work on the premise...
Well running late today, busy day so only just had chance to look at the heat press.
Installed the new SSR, still not getting the signal and no lights ;-(
So no further on, I'll have a proper...
Will post results as soon as I get new SSR and fit it,
Was checking and double checking connections today !
Stripped down old controller through curiosity today, nothing physically visible in...
Just a quick catchup, not received new SSR today, sat by letterbox all morning ;-(
Can confirm however the ID of old controller as XMTE 2001, new controller already confirmed as XMTE 2301 !
...
This is certainly an interesting project, and once again very sensible advice, I will try the new "SSR" and see where we are, certainly moved forward a good bit and hopefully get this one nailed with...
Controller, Transformer, Platen !
Ok So this is where we are:
The controller at least appears to be working, the Thermistor is where it should be and not in the box ;-), I turned the heat press on, controller lights up and...
Just a quickie, and one I should have asked earlier, in the centre of the old controller is a small resistor, neatly slotted into the middle between the connectors, this is not replicated on the new...
I do have a meter, naturally its down my workshop - will try to pop across tomorrow or bring it home Monday, along with my trusty 4lb lump hammer ;-)
Decca
One other thought I had was that many presses have an integrated timer and controller, which could possibly account for the extra connections ?
Decca.
http://www.dyesubforum.co.uk/vbforum/attachment.php?attachmentid=4480&stc=1http://www.dyesubforum.co.uk/vbforum/attachment.php?attachmentid=4481&stc=1http://www.dyesubforum.co.uk/vbforum/attachment.ph...
Hi Guys
Appreciate the input !
will see if there is anything to id the controllers and post details or images shortly, nothing on fron or rear but there is on the side a label, although it is...
http://www.dyesubforum.co.uk/vbforum/attachment.php?attachmentid=4473&stc=1http://www.dyesubforum.co.uk/vbforum/attachment.php?attachmentid=4474&stc=1Hi Guys
I have an heat press that does not...