Hi All!
We've got a different brand of sublimation transfer paper in, S-Race; it is available pre-cut for mugs as well as in A4, A3 and A3+ and we'd like to get some opinions on it.
So, the first 20 people to message us with their name and address will have a pack of 100 sheets of the pre-cut mug paper sent out to them!
What is the actual cut size please
It is 210mm x 98mmOriginally Posted by ArferMo
That will be too small for me not enough margin on a Listawood 11oz mug
Too big for me, 92mm max height on a typical 10oz mug.
Thanks guys, all feedback welcome :)
Looking for a decent A3+ paper for garment printing ( only) for ages - few and far between. I would be interested to hear how this compares to TexPrint HPXR, which isn't available as A3+ in UK.
Message us your address and we'll send you out the mug paper, it is the same paper as the A3+ just cut smaller so you could still test it out on garments to see how it compares?
Too small for me also.It is 210mm x 98mm
I get two sizes cut of Tru Pix for two different size mugs for oven wraps...
10 Ounce LW mugs I use 235 x 100
11 ounce LW Two Tone mugs I use 240 x 100
When using ovens and wraps it is really important to get the paper to extend out of the wrap, hence the size I require.
No complaint here, just giving my feedback on mug paper size.
I get why it is offered at 210 though
USING: Whatever it takes to get the job done...
I used over a box of A4 S race paper on a garment job doing a largish dark one colour logo and colour came through the paper to mark the cover sheet every press. Id not noticed it happen with trupix or Jetstream papers
Posting Permissions
Reply With Quote