I know, best/cheapest doesn't really work well together :)
I'm needing to buy some application tape for CAD/CUT printable (Roland BN20) textile vinyl - you know, the tape you can llft your design and press with the heat press.
Thanks
John
I know, best/cheapest doesn't really work well together :)
I'm needing to buy some application tape for CAD/CUT printable (Roland BN20) textile vinyl - you know, the tape you can llft your design and press with the heat press.
Thanks
John
Neoflex Direct to Garment Printer, Brother BAS-463 3 Head Embroidery Machine, Gerber Edge FX & 1, Gerber GS15Plus Plotter, Ricoh GX-7000 GelsPrinter, Adkins BETA Major Pneumatic Press, Graphtec CE5000-60 & Craft Robo, HTP616 Twinhead Mug Press & 2 Halogen Ovens.
I use Siser's TTD easy.
If I am being really tight I can get three or four transfers out of each piece.
Really nice to peel etc etc. £41.00 ish for a 500mm roll
USING: Whatever it takes to get the job done...
we sometimes use the carrier from vinyl if we have done big prints.
can use several times, thou not as sticky as proper transfere tape.
from memory its only about 20 quid for 50m roll thou ....
1 Hour T-shirt printing shop in Newcastle upon Tyne.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Logobear t-shirt print and embroidery. 74 Clayton Street. Newcastle. NE1 5PG. UK
I have moved over to 100% Dae Ha products and find their application tape the best I have used. They have 500 and 750 wide. https://www.garmentfilms.co.uk/printable-films-c3/application-tape-500mm-p9
[h=A dictionary is the only place where success comes before work]5[/h]Laura
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Thanks all for your replies and ideas :)
I think I must be getting to be a stingy old git!!!
Thanks
John
Neoflex Direct to Garment Printer, Brother BAS-463 3 Head Embroidery Machine, Gerber Edge FX & 1, Gerber GS15Plus Plotter, Ricoh GX-7000 GelsPrinter, Adkins BETA Major Pneumatic Press, Graphtec CE5000-60 & Craft Robo, HTP616 Twinhead Mug Press & 2 Halogen Ovens.
mylar tape for rhinestones worked well for me.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
<-- How To Print Stuff BLOG
John, that is what I like about the Dae Ha stuff, they say up to 7 times, I would say at least 7 times, and their own vinyl has a great sticky backing, and I am using a lot less application tape as I am recycling their backing where I can.
[h=A dictionary is the only place where success comes before work]5[/h]Laura
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
I contacted Dae Ha via email this morning and mentioned your recommendation :)
Do you print on textile vinyl at all aka Roland BN-20? Not sure whether to go sticky or really sticky so asked for a sample.
Cheers
John
Neoflex Direct to Garment Printer, Brother BAS-463 3 Head Embroidery Machine, Gerber Edge FX & 1, Gerber GS15Plus Plotter, Ricoh GX-7000 GelsPrinter, Adkins BETA Major Pneumatic Press, Graphtec CE5000-60 & Craft Robo, HTP616 Twinhead Mug Press & 2 Halogen Ovens.