It seems that Angie has pressed a few 'unknown' buttons on our Tajima Neo TEJT c1501 and since, when I load a pattern and attempt to enter the needle/colour selection, none of the numbers work!
Any ideas what might have changed?
John
It seems that Angie has pressed a few 'unknown' buttons on our Tajima Neo TEJT c1501 and since, when I load a pattern and attempt to enter the needle/colour selection, none of the numbers work!
Any ideas what might have changed?
John
Neoflex Direct to Garment Printer, Brother BAS-463 3 Head Embroidery Machine, Gerber Edge FX & 1, Gerber GS15Plus Plotter, Ricoh GX-7000 GelsPrinter, Adkins BETA Major Pneumatic Press, Graphtec CE5000-60 & Craft Robo, HTP616 Twinhead Mug Press & 2 Halogen Ovens.
Hi John, never happened to me, thank god. Cant help other than suggest ringing the Tajima peeps in the UK.
Think I;ve sorted it Earl. We don't use the machine enough and forget!! Probably user error in this case.
Also had a Windows 10 failure which after days of trying to fix without success, decided to bite the bullet and rebuild from scratch!
I'll answer about BN-20 later but in short, we couldn't do without it.
Neoflex Direct to Garment Printer, Brother BAS-463 3 Head Embroidery Machine, Gerber Edge FX & 1, Gerber GS15Plus Plotter, Ricoh GX-7000 GelsPrinter, Adkins BETA Major Pneumatic Press, Graphtec CE5000-60 & Craft Robo, HTP616 Twinhead Mug Press & 2 Halogen Ovens.
Glad you got it sorted and look forwards to hearing about the BN20. If my PM is a little strange it was because I was a little under the influence when I wrote it. Wine does that dont you know.