To me it seems that the edges of my prints seem to fade a little bit with the surounding area.
It's hardly noticeable but it seems that the edges aren't crisp enough for me .
photo_2020-05-17_19-03-31.jpg
in detail
photo_2020-05-17_19-03-45.jpg
when the item is printed on the paper it is crisp, so i assume it happens during the sublimation process. I have tested A+/AA+ & premium mugs, they al seem to have the issue so it has to oven step.
I preheat the oven at 180°C- 200°C
mug is silicon wrapped, i leave it in for 10 min at 180-190°C; after that i get it out and put it in hot water (around 50°C) and leave it there to cool down, then i unwrap it ..
Am i doing something wrong ? Input is highly appreciated, or is this the limit of sublimation ?
photo_2020-05-15_12-00-33 (4).jpgphoto_2020-05-15_12-00-33 (2).jpg