Mugs not straight :(

[tucks09]

Hi,

I've been having problems with AAA white Listawood mugs not being completely straight, doesn't normally matter normally with the designs i use but these ones are full colour and i'm using the oven with wraps. I keep getting faded areas in the same places on the majority of the mugs and it's driving me crazy! Do I need tighter mug wraps, shrink film or are there better mugs out there? Appreciate any advice

Thanks
Carly

[Mrteajunkie]

I use the 10oz Durham mugs from mdp and only had two issues.
But I also use a press rather than an oven so I can always make sure there’s a decent pressure on the mug.

[Justin]

We've had consistent fading on those mugs, we always return to Xpres 5013 as we have no problems at all.

[billy8581]

Is use these, had no issues so far https://www.dyesublimationsupplies.c...tion-Mugs-x-36

[tucks09]

Thanks everyone. I think i'm going to use the press instead of the oven for this job and cut them 2cm shorter. Thanks Justin, will give Xpres another go I think