Is anybody using the Sunangel Ultrabrite 5 transfer paper with the OKI 63TW laser printer. I am having numerous issues to which Sunangel do not seem to know the answer and keep telling me to; increase/decrease time, temp, pressure which sometimes work and sometimes don't. The problem I seem to have is in making the transfers, sticking the printed sheet to the adhesive sheet. The adhesive is not sticking in places but the problem is intermittent. I can do a few sheets that are fine and then get some where half the sheet has no adhesive and then it can go back to being fine again. I have tried changing the aforementioned variables one by one, and again, some are fine and some are not. It has been suggested that it is the press but then why is it happening so inconsistently? I have tried using a different press but the problem is the same.
Any suggestions please.