Replacement Parts

Vinylman · Post by **Vinylman** » 28 Apr 2016, 13:38

Hi guys, I am looking for a replacement part for my mug press. It is the bit that you tighten or losen depending on the hug or bottle you are pressing. It doesn't seem long enough to get a tight fit for water bottles but is spot on for mugs.

Some advice would be great.

Cheers in advance

Justin · Post by **Justin** » 28 Apr 2016, 13:58

Think silicone sheet or rubber cut to size should allow you to do bottles, I'll try and find eBay link.

Vinylman · Post by **Vinylman** » 28 Apr 2016, 14:02

Cool, I have a teflon sheet but thought there would be a longer bolt that fits so I can do them all without change sleeves etc. If that makes sense

Justin · Post by **Justin** » 28 Apr 2016, 14:04

It still wouldn't tighten, you need to decrease the interior dimensions with a sheet.

logobear · Post by **logobear** » 28 Apr 2016, 15:08

silicon sheet mate.
there are old presses about designed for 11oz mugs - don't grip the 10oz - unless you find an engineer so sort I don't think you will find the mod

Vinylman · Post by **Vinylman** » 28 Apr 2016, 15:09

Perfect, thanks guys. So longer times then or higher temp with the sheet?

DSF

DSF

Replacement Parts

Re: Replacement Parts

Re: Replacement Parts

Re: Replacement Parts

Re: Replacement Parts

Re: Replacement Parts

Re: Replacement Parts

Who is online