DSF

Ha-ha, indeed it is! Found by powering on with pause button down, Google search 9600 supersonic clean. But use at your own risk, massive ink use! Lol. Also remember you can empty and reset waste cart easily on these.

I'm looking for another 9600 so if you'd prefer to just sell on for a handsome profit.....

No joy with this the cyan is still not moving


Sent from my iPhone using Tapatalk

Are you using refil carts?

No genuine epson carts

If you are using refill carts make sure the air vent is free on the cartridge, partial fill of the lines would hint at possibly not breathing, or not seating correctly. My refill carts came with plastic wedges. Push the cart in, jam the wedge in underneath and all was superb. I have heard of non genuine carts needing to be wedged as well. This makes the seal secure, hence it then draws the ink.

Janners

Now when the screen says ready and i press the right arrow all I get it printer status whereas before I got printer set up!!!
and I could access nozzle check

In the traditional manner, turn off, wait, turn back on.

Have managed to release the dampers and pulled the ink through but I fear the head is knackered as there is nothing coming through the cyan channel.

I know the text is upside down i took the photo with paper still in the printer.
I have currently got a wad of blue roll tissue soaked in Ink cleaner sitting behind the head cleaning it.


So here's to tomorrow.


Sent from my iPhone using Tapatalk

Looks like a knackered head , dont do more than a couple of supersonic cleans this WILL break the crystals in the head

I have only done one super sonic clean.