Page 2 of 2

Re: Cushion covers

Posted: 13 Mar 2013, 17:58
by purpledragon
i use ironing board felt

Re: Cushion covers

Posted: 13 Mar 2013, 21:37
by James990
WOW what a good idea. Do you use it single or doubled up?

Re: Cushion covers

Posted: 14 Mar 2013, 08:53
by purpledragon
doubled up is probably best depends on the quality of the felt you can get some of it is pretty poor and gets very thin very quick

Re: Cushion covers

Posted: 14 Mar 2013, 09:18
by viccar
or what about this foam pad that you can cut to size quite cheap
http://www.targettransfers.com/dynamic/ ... em=FOAMPAD

Re: Cushion covers

Posted: 14 Mar 2013, 10:17
by purpledragon
viccar;67534 wrote:or what about this foam pad that you can cut to size quite cheap
http://www.targettransfers.com/dynamic/ ... em=FOAMPAD
not as cheap as ironingboard felt from the pound shop !!!

Re: Cushion covers

Posted: 14 Mar 2013, 11:19
by James990
Hum, will have to pop to the pound shop today then!

Re: Cushion covers

Posted: 14 Mar 2013, 12:32
by viccar
im off to pound shop later to find some as well :biggrin: thanks for the tip

Re: Cushion covers

Posted: 14 Mar 2013, 12:44
by James990
Mine don't have any so will have to resort to fleebay!