DSF

My Ricoh SG3110 was off for about an hour due to a power cut. On switching back on the Cyan has stopped printing. I have tried nozzle cleans and head flushing with no success.

Any suggestions?

Keith

If your still in warranty, I would stop doing any head flushes/cleans as you'll waste an awful lot of ink, and contact your supplier directly for advice.

I'm out of warranty unfortunately. Looks like a new purchase on the way!

Tried a nozzle check again this morning and no ink on the paper at all.

Is my printer dead?

Well I don't like to give up and it seems my perseverance has paid off. I had another error which was SC 28211. I found a video on error code SC 28212 and decided to try it. After a while, new inks and a waste tank reset I'm back printing again