DSF

OK, so I finally managed to get the CISS system on the Epson XP-322 printer working. Did a couple of test prints and all was good.

Today, we got the Subli-Flex 202 out and printed what we wanted to transfer but had a few problems with the print quality (banding with yellow & cyan) so I did a head clean, align test. In total I probably printed off about 10 test pages.

Does it sound right that all the ink has been used?

I am talking about approx £85 worth of ink, used in the space of half an hour and 10 sheets of A4.

Where have we gone wrong??

Certainly doesn't sound right! Is the CIS completely empty or are you just getting a blank print?

IKR, the whole CISS system is empty. Before this small amount of printing, the cartridges were full and the containers feeding them were three quarters full..