DSF

I have an epson D120 with artainium inks and print through Adobe CS3, but seem to have a problem with blue prints!
It shows up on the screen as royal blue, prints out in near black and presses in navy blue.
Is this normal or am I doing something wrong?
I've checked the heads and the nozzel check is fine.

Any help or advice greatly appreciated.

dont want to sounds daft but did u instal your ICC?

Hi Paul,

Yes, I installed the ICC manually, as per the instructions.

so all colors print just fine yes? only blue is the problem?? if so you may need to bright you r. blue biit more in ps. dont kbow why but i found some shades of colors just wont print. i think sublimation color palete is very limited. but correct me if i am wrong. sorry i dont think will be any help for u dawn...

Hi Paul,

I think you're right about the colour pallet on the D120! All the other colours seem fine, I just can't get royal blue only navy
I did have an epson 1400 awhile ago and never had a problem with the colours.
Thanks for your help.

What temp/ time are you pressing for? Too hot for too long can darken the image.
Possibly increase brightness by up to 20-25% in photoshop to compensate for the colours.