DSF

Hi,

Quick question, has anybody printed on boxing shirts as in the mixed fabric type shorts, almost like a satin/silk finish?

I have been asked to print up a pair for a fighter with a vinyl logo on them, are these safe to print on?

thanks

I have been asked to print up a pair for a fighter......

Not a job you'd want to make a mistake with! :frown:

Is hotflex a goer with a satin type fabric?

we do very frequently, just use standard Magic Touch premium flex.
they keep coming back, so must be ok

I have a jacket that my customer had printed up and to be honest all the vinyl is peeling off, 4 prints and he was charged £45.00 for it, also all the fonts were different which is not good, they also threw in some tshirts for free, which were also not very good so he has come back to me to do more of his fight gear.
He said I would be able to test on his jacket (botched one) so I may try some hotflex from MDP which prints at 160c to see how it does on this jacket.

What temp does your flex need logobear out of interest?

nylon flex will stick to anything ....

Hi Logobear

is this the same as flex cut sticky from yolo?