Page 1 of 1
Re: Nozzle check Aisle 4
Posted: 19 Feb 2017, 20:02
by mfatty500
[FONT="]Is there any need for alarm with my nozzle check looking like this? It appears to be printing fine after aligning, and a head reposition (and head cleanings)? Thanks for any advise.
[/FONT]
Re: Nozzle check Aisle 4
Posted: 19 Feb 2017, 21:48
by Reg
Don't worry it will probably clear itself with use.
Re: Nozzle check Aisle 4
Posted: 20 Feb 2017, 08:29
by webtrekker
In my experience that's nothing to worry about. Sublimation tends to blend in small defects like this. Even with more pronounced banding on printouts I have still managed to get good, solid prints after sublimating.
Funny how the magenta head seems to cause the most problems on Ricohs.