DSF

Hi All!

We've got a different brand of sublimation transfer paper in, S-Race; it is available pre-cut for mugs as well as in A4, A3 and A3+ and we'd like to get some opinions on it.

So, the first 20 people to message us with their name and address will have a pack of 100 sheets of the pre-cut mug paper sent out to them!

What is the actual cut size please

ArferMo;126176 wrote:What is the actual cut size please

It is 210mm x 98mm

That will be too small for me not enough margin on a Listawood 11oz mug

Too big for me, 92mm max height on a typical 10oz mug.

Thanks guys, all feedback welcome

Looking for a decent A3+ paper for garment printing ( only) for ages - few and far between. I would be interested to hear how this compares to TexPrint HPXR, which isn't available as A3+ in UK.

pw66;126191 wrote:Looking for a decent A3+ paper for garment printing ( only) for ages - few and far between. I would be interested to hear how this compares to TexPrint HPXR, which isn't available as A3+ in UK.

Message us your address and we'll send you out the mug paper, it is the same paper as the A3+ just cut smaller so you could still test it out on garments to see how it compares?

It is 210mm x 98mm

Too small for me also.

I get two sizes cut of Tru Pix for two different size mugs for oven wraps...

10 Ounce LW mugs I use 235 x 100
11 ounce LW Two Tone mugs I use 240 x 100

When using ovens and wraps it is really important to get the paper to extend out of the wrap, hence the size I require.

No complaint here, just giving my feedback on mug paper size.

I get why it is offered at 210 though

I used over a box of A4 S race paper on a garment job doing a largish dark one colour logo and colour came through the paper to mark the cover sheet every press. Id not noticed it happen with trupix or Jetstream papers