DSF

Trying to find a new holder and blade for a machine, suppliers want £60 to ship from from overseas. It's for a Skycut machine.

I'm pretty sure this is a standard holder used across many machines, Roland, GCC, Siser for example. Comparable costs on eBay are £12 for 15 blades and 1 holder!

If anyone uses exact same please let me know. TIA.

[ATTACH=CONFIG]7071[/ATTACH]

I think most of the popular blades are 0.94mm shank diameter. Have you an old blade you can measure?

No, I didnt get the holder or blade with the machine.

Do you know the machine model number Justin? Here are some blade holder sizes for a couple of models ...

[ATTACH=CONFIG]7072[/ATTACH]

[ATTACH=CONFIG]7073[/ATTACH]

Yes, it's the Skycut A3 Max 2, looks like a C Series...yes, as per your first image.

I found them in China but was hoping to get something a bit quicker.

https://www.alibaba.com/product-detail/ ... 13350.html

Justin;151837 wrote:Yes, it's the Skycut A3 Max 2, looks like a C Series...yes, as per your first image.

I found them in China but was hoping to get something a bit quicker.

https://www.alibaba.com/product-detail/ ... 13350.html

Have you tried a smart knife?
edward Mathias might supply the right one for this and cheaper than holder and seperate blades.

Just looking for a cheap option to test the machine is working perfectly, I've used their knives before and whilst they are excellent they are quite expensive. I can get one from China, just wanted to get on with it.

Justin;151847 wrote:Just looking for a cheap option to test the machine is working perfectly, I've used their knives before and whilst they are excellent they are quite expensive. I can get one from China, just wanted to get on with it.

Ah ok.
I could send you mine if you send it back when your finished if you are just testing it out?
I have a holder for a Roland, graphtec and a us cutter machine if any of those are the right size?

I have smart knives in all My machines so it wouldn’t be an issue.

[ATTACH=CONFIG]7096[/ATTACH][ATTACH=CONFIG]7097[/ATTACH][ATTACH=CONFIG]7098[/ATTACH][ATTACH=CONFIG]7099[/ATTACH]

Would you mind sending me a quick photo of the holders?

Added on the above post for you fella.

blue tip is graphtec
all black is the Roland
black and silver top is the us cutter.