Page 1 of 3

Re: Mug press for 11oz mugs

Posted: 10 May 2011, 19:09
by Paul
Hi lot! I have mug press for sale. very good condition. heat blanket done not more then 2 boxes of mugs. Always heated up with "dummy" mug inside.

Mug press have two control screens. one for temp and one for time. time is counted down when green buttom pressed. when reach zero play silly music :) this means time is up and mug is redy.

Image

Image

Image

Image

Image



here is last mug i pressed with this press.

Image

Image

Image


nice top to the bottom picture can be printed (only tryed on coralgraph mugs)


[CENTER][SIZE="5][COLOR="red]£90 + postage[/COLOR][/SIZE][/CENTER]

Re: Mug press for 11oz mugs

Posted: 10 May 2011, 19:31
by Andrew
You retiring Paul?

Re: Mug press for 11oz mugs

Posted: 10 May 2011, 19:38
by Paul
nope :) got two :) and mug mACHINE :d i AM GOING TO lONDON FOR PHOTOGRPAHY WORKSHOP AND NEED SOME MONEY :)

Re: Mug press for 11oz mugs

Posted: 10 May 2011, 19:43
by Andrew
What make is it Paul? Any chance of a photo of the plug connection - the internal connection part? Just wondering if it is compatible with what I have.

Re: Mug press for 11oz mugs

Posted: 10 May 2011, 20:01
by Paul
it say cs-y1 and cable is standard pc cable. like this one:
Image

Re: Mug press for 11oz mugs

Posted: 10 May 2011, 20:04
by Andrew
Lol, sorry Paul, I should have been more specific. I meant the heat element plug connection. I have many presses and was wondering if the elements I had would plug straight in. It looks to be a very similar style.

Re: Mug press for 11oz mugs

Posted: 10 May 2011, 20:06
by Paul
lol :) is round with 4 holes. so is for 4 pin connector.

like on this pic :)
Image

Re: Mug press for 11oz mugs

Posted: 10 May 2011, 20:29
by Andrew
Looks similar to some of the elements I have.

Where is the press from?

Re: Mug press for 11oz mugs

Posted: 10 May 2011, 20:29
by Paul
china like all of them mate :)

Re: Mug press for 11oz mugs

Posted: 10 May 2011, 20:34
by Andrew
Just wondering on the spare elements. We usually have to replace them every few months which was why I was checking the attachment.