Page 1 of 1
Re: Door plates
Posted: 07 Apr 2012, 16:26
by phoenixalpha
Does anyone know of a decent (and cheap) source for aluminium door plates with pre drilled holes, screws and screw caps?
Re: Door plates
Posted: 07 Apr 2012, 16:49
by bms
phoenixalpha;43605 wrote:Does anyone know of a decent (and cheap) source for aluminium door plates with pre drilled holes, screws and screw caps?
We can cut any shape (square/ rectangle) with rounded edges and holes in corners. Don't do the screws and screw caps though.
Re: Door plates
Posted: 07 Apr 2012, 17:18
by Paul
Re: Door plates
Posted: 07 Apr 2012, 17:23
by phoenixalpha
Doesnt need to be for sublimation though.
Re: Door plates
Posted: 07 Apr 2012, 18:23
by phoenixalpha
Can anyone give me a price for (or know of somewhere that does) A5 aluminium sheets with rounded corners at least 1.5mm thick and two screw holes?
Re: Door plates
Posted: 11 Apr 2012, 17:25
by Dezignwar
I may be able to help but it would be after the weekend when i have a confirmed answer and price. where i work full time we have a punch machine which is capable of doing up to 6mm alloy.. i have some of my own 1.5mm white alloy that i could pos punch on it to any shape and size with any holes required.. if thats any help.