Banding issues

Having Problems? Come on in!
Post Reply
User avatar
Quinsfan
Posts: 1213
Joined: 13 Nov 2013, 15:50
Contact:

Re: Banding issues

Post by Quinsfan »

I know this has been raised before but I thought I would show the issues I am having and my thoughts.
This is the test image printed directly from the menu on my Ricoh 3110 printer. There is no obvious banding.
Image

This is printed from my pic through Powerdriver. Obvious banding.
Image

This image was also printed through powerdriver.
Image

Same image direct to my Ricoh NOT through Powerdriver. There are some issues but I believe that is due to there being no ICC involved. The banding has disappeared in the location of the previous image.
Image

Nozzle check
Image

My Powerdriver setting are Trupix paper and unisub products for these images.
I believe that the banding is caused by Powerdriver not the printer as the first image is printed directly from the printer with no PC or ICC involved and it is a perfect print.

Any thoughts from my fellow members would be interesting.






Sent from my iPhone using Tapatalk
Many thanks
Iain

Equipment used A4 Ricoh printer, HP3085 Heat Press Graphtec cutter, Jarin mug press, CJV 30-60 solvent printer and lots of help from DSF.
GoonerGary
Posts: 2440
Joined: 29 Jun 2010, 16:02
Contact:

Re: Banding issues

Post by GoonerGary »

When was the last time you realigned your print heads through the driver?
User avatar
Quinsfan
Posts: 1213
Joined: 13 Nov 2013, 15:50
Contact:

Re: Banding issues

Post by Quinsfan »

TBH Never wouldn't even know what that does. Just left it on as instructed and let it do its own cleans and maintenance. When you say through the driver I assume you mean Powerdriver.
Many thanks
Iain

Equipment used A4 Ricoh printer, HP3085 Heat Press Graphtec cutter, Jarin mug press, CJV 30-60 solvent printer and lots of help from DSF.
GoonerGary
Posts: 2440
Joined: 29 Jun 2010, 16:02
Contact:

Re: Banding issues

Post by GoonerGary »

I'm not familiar with your printer, but on Epsons it's beside the nozzle check in the maintenance section. My A4 Epson WP-4095 office type printer has more alignment checks than my A3 'photographic' 1500W.
User avatar
Quinsfan
Posts: 1213
Joined: 13 Nov 2013, 15:50
Contact:

Re: Banding issues

Post by Quinsfan »

Thanks Gary
I can access menus in the printer or through Powerdriver. Both are different. I think this is a Powerdriver issue due to the fact that the test print direct from the printer not via any software is fine. The printer does not even need to be connected to print this.


Sent from my iPhone using Tapatalk
Many thanks
Iain

Equipment used A4 Ricoh printer, HP3085 Heat Press Graphtec cutter, Jarin mug press, CJV 30-60 solvent printer and lots of help from DSF.
GoonerGary
Posts: 2440
Joined: 29 Jun 2010, 16:02
Contact:

Re: Banding issues

Post by GoonerGary »

The banding almost looks like draft quality. Can you change the paper settings to something higher than plain paper or 'best photo'?

Or perhaps a Windows update has upset the powerdriver.
User avatar
Quinsfan
Posts: 1213
Joined: 13 Nov 2013, 15:50
Contact:

Re: Banding issues

Post by Quinsfan »

I will have a look later. Cheers


Sent from my iPhone using Tapatalk
Many thanks
Iain

Equipment used A4 Ricoh printer, HP3085 Heat Press Graphtec cutter, Jarin mug press, CJV 30-60 solvent printer and lots of help from DSF.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest