Banding on first section of A3 printout

[Nwprint]

Hey! I’d be really grateful for any ideas on how to resolve this band I’m getting on just the first section of each A3 printout from my Epson WF7610. I’ve rotated the image and reprinted and the same band appeared about an inch in so I know it’s not on the image but a printing issue. I’ve tried with high speed turned off but no improvement.
Thanks!


Sent from my iPhone using Tapatalk

[InkExperts]

Looking at the bottom of the print on the left hand side (above) it looks like the printing heads are out of alignment as there is a double / ghosted edge along the bottom edge of the print.

I would start by checking the alignment of the printing heads.

Alex