Sub paper from coralgraph

Can't find the right section? Discuss it in here!
Post Reply
scottenti
Posts: 19
Joined: 04 Feb 2012, 19:18
Contact:

Re: Sub paper from coralgraph

Post by scottenti »

Has anyone purchased any sub paper from coralgraph recently?

I purchased some off them through ebay and the print quality is very poor. I printed pic on new batch of paper and it was very bad quality blurred etc. Then I printed same pic straight after with same settings etc on previous batch of paper and quality was ok must be something wrong with paper I am using correct side of paper.
User avatar
Justin
Site Admin
Posts: 12090
Joined: 23 Jan 2026, 13:12
Location: Derbyshire
Has thanked: 11 times
Been thanked: 9 times
Contact:

Re: Sub paper from coralgraph

Post by Justin »

I have a pack here, never got on with it so I stick to Xpres paper.
User avatar
Paul
Posts: 8557
Joined: 28 Sep 2009, 05:00
Contact:

Re: Sub paper from coralgraph

Post by Paul »

i had coralgrah paper before and it was alright. I wouldn't compare it to texprint or truepix but not to bad. Bit dear for what you get tho...
http://www.howtoprintstuff.co.uk <-- How To Print Stuff BLOG
scottenti
Posts: 19
Joined: 04 Feb 2012, 19:18
Contact:

Re: Sub paper from coralgraph

Post by scottenti »

The first batch I got was ok But this second batch is useless
User avatar
JackB
Posts: 343
Joined: 10 Aug 2011, 17:55
Contact:

Re: Sub paper from coralgraph

Post by JackB »

scottenti;47143 wrote: I am using correct side of paper.
You should be printing on the brightest side of the paper, if you wet your finger and thumb the sticky side of the paper is the printing side.

Jack.
If at first you don't succeed, read the manual.
scottenti
Posts: 19
Joined: 04 Feb 2012, 19:18
Contact:

Re: Sub paper from coralgraph

Post by scottenti »

One side is white the other side is off white, I am using the white side
User avatar
JackB
Posts: 343
Joined: 10 Aug 2011, 17:55
Contact:

Re: Sub paper from coralgraph

Post by JackB »

scottenti;47192 wrote:One side is white the other side is off white, I am using the white side
The White side is the right side.

Jack.
If at first you don't succeed, read the manual.
User avatar
JSR
Posts: 2303
Joined: 28 Oct 2009, 04:00
Contact:

Re: Sub paper from coralgraph

Post by JSR »

I have a pack of it here and would agree with others. It's okay if your intention is to cut every corner imaginable but, otherwise, look to Xpres paper for economy and TruPix/TexPrint for the best. The difference between actual cost-per-sheet is almost negligible.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests