Yolo v TMT v xpress v etc
Re: Yolo v TMT v xpress v etc
I have been advised by TMT that my issue is going to be my press.. as allegedly it won't hold a low temperature for long enough.. so the WOW papers atleast for me are out the window..
If you receive your Xpres sample and it's not printed, do let me know lol.
I have just emailed Merlin Transfers regarding their Trim Free for lights for a sample.. so that will be an interesting one after Target Transfers can't guarantee their Exact Print won't mess up the printer.
If you receive your Xpres sample and it's not printed, do let me know lol.
I have just emailed Merlin Transfers regarding their Trim Free for lights for a sample.. so that will be an interesting one after Target Transfers can't guarantee their Exact Print won't mess up the printer.
Behind every great man.. is a surprised mother in law..
Re: Yolo v TMT v xpress v etc
Lucky I read this thread was just about to order a Oki 511!!! Will watch and wait to see if I should just get the 301!!
Mimaki CG60-st cutter , Ricoh 3110 sub printer , OKi laser , Epson inkjet , 2x heat press , mug press , cap press, Flexisign pro and coreldraw X6..............and learning ...........
and now a Roland SP-300v Versacamm !!!!!!
and now a Roland SP-300v Versacamm !!!!!!
- Justin
- Site Admin
- Posts: 12090
- Joined: 23 Jan 2026, 13:12
- Location: Derbyshire
- Has thanked: 11 times
- Been thanked: 9 times
- Contact:
Re: Yolo v TMT v xpress v etc
If the 301 will work ok then that may well be a better (and cheaper) option. I'm not sure what benefit the 511 is....will have a look at the specs again, must be a good reason why I bought it!
Re: Yolo v TMT v xpress v etc
I remember Simon saying the 301 won't work with some TMT papers ?? I think it was
Behind every great man.. is a surprised mother in law..
- Justin
- Site Admin
- Posts: 12090
- Joined: 23 Jan 2026, 13:12
- Location: Derbyshire
- Has thanked: 11 times
- Been thanked: 9 times
- Contact:
Re: Yolo v TMT v xpress v etc
More samples arrived from TMT today, no response from Xpres to latest email.
Re: Yolo v TMT v xpress v etc
Merlin Transfers are going to send me a sample of their Trim Free Lights paper.. but so far haven't had anything I can test
Still waiting on Serigraf samples - not holding out much hope there at the moment though
Still waiting on Serigraf samples - not holding out much hope there at the moment though
Behind every great man.. is a surprised mother in law..
-
socialgiraffe
- Posts: 4597
- Joined: 16 Jun 2011, 23:40
- Been thanked: 1 time
- Contact:
Re: Yolo v TMT v xpress v etc
NopeI remember Simon saying the 301 won't work with some TMT papers ?? I think it was
USING: Whatever it takes to get the job done...
-
socialgiraffe
- Posts: 4597
- Joined: 16 Jun 2011, 23:40
- Been thanked: 1 time
- Contact:
Re: Yolo v TMT v xpress v etc
That comes as no surprise mate, they are absolutely useless. To such a point now that even if I have a quote for something only they sell I decline to quote rather than deal with them.no response from Xpres to latest email.
USING: Whatever it takes to get the job done...
Re: Yolo v TMT v xpress v etc
That's the one.. I knew there was one in there that you mentioned didn't work lol
The 510 is listed as supported but I have been advised by them that the Exact Print hasn't been tested with the 511 and it's a test at own risk :/
The 510 is listed as supported but I have been advised by them that the Exact Print hasn't been tested with the 511 and it's a test at own risk :/
Behind every great man.. is a surprised mother in law..
- Justin
- Site Admin
- Posts: 12090
- Joined: 23 Jan 2026, 13:12
- Location: Derbyshire
- Has thanked: 11 times
- Been thanked: 9 times
- Contact:
Re: Yolo v TMT v xpress v etc
I've heard this from several places now. I've tried hard to work with them recently but they really do seem impossible to deal with.socialgiraffe;77737 wrote:That comes as no surprise mate, they are absolutely useless. To such a point now that even if I have a quote for something only they sell I decline to quote rather than deal with them.
Who is online
Users browsing this forum: No registered users and 1 guest
