DF50 Heat Press, Rock Slate printing.

[twinx05]

Hi,

I have just printed my first couple of Rock Slates, size 20x20 using a DF50.

The thing is the clamp is proper tight to the plate when obviously closed , but i can't get the top any higher ?

Has anyone else on here had the same problem or am i doing something wrong ?

Ps, the second one has come out ok, but the pressure is well tight to the plate.

Cheers in advance.

Jason

[bms]

The DF50 has an adjustable platen using the black dial. Anticlockwise screw opens up the platen.

[twinx05]

hi,

Yes i've opened it up, anticlockwise right up to the Silver Nut.
It's way to tight on the Slate.