Advice on faint transfers please

[Ian M]

(waits for the puns to start about a F machine now...)

THHHHHHHHHHHHHHUUUUUUUUURRRRRRRRRRRRPPPPPPPPP!

There you go Martin :biggrin:

[mummywebb]

Is you press 190 degrees C or 190 degrees F? Does the display go up to 350-400 - if so then it might be a F machine (waits for the puns to start about a F machine now...)

It's one I bought from you Martin the 30cm x 38cm swing away press I just assumed it was centrigrade it's pressed all my HTV fine so far anyway!

[Ian M]

You really do need an ICC profile to get the correct colours & you will have to have a custom made one because, the Epson S22 isn't a supported printer.

Where did you buy the inks from?

[mummywebb]

You really do need an ICC profile to get the correct colours & you will have to have a custom made one because, the Epson S22 isn't a supported printer.

Where did you buy the inks from?

ok I think I can the profile from the seller ......

[Paul]

I think you also print on "normal" setting of your printer if image is ok on paper.

[mummywebb]

I think you also print on "normal" setting of your printer if image is ok on paper.

With the Epson I selected the photo setting as it was a photo I was doing not the "best" setting. You get several options including text, photo, best photo, text and image or draft.

[bms]

It's one I bought from you Martin the 30cm x 38cm swing away press I just assumed it was centrigrade it's pressed all my HTV fine so far anyway!

Yes that is a C machine. Sorry if I didn't recall you bought this from us - the DSF pseudonym means very little to me unless it's an acronym of your account reference with us

[accdave]

It was advertised as sublimation ink it came in refillable cartridges

From a reputable supplier ?

[mummywebb]

Yes that is a C machine. Sorry if I didn't recall you bought this from us - the DSF pseudonym means very little to me unless it's an acronym of your account reference with us

no that's fine I bought it a while ago had to check my emails before I said that! I've been using it for HTV so far. I bought the xpres paper from you and I'm wondering if I printed on the wrong side - it's hard to make out which side is which. Is there an easy way to identify the right side to print on? Thanks

[mummywebb]

From a reputable supplier ?

Well not a licenced one anyway